Summary of "ТУТОРИАЛ на РУМИ | Укладка парика K-pop Demon Hunters"

Summary of the Tutorial “ТУТОРИАЛ на РУМИ | Укладка парика K-pop Demon Hunters”

This detailed tutorial demonstrates the process of creating a custom wig base and styling it into a helmet inspired by the popular “Demon Hunter” cartoon character Ruma. It focuses on the frame, weaving, and finishing techniques for a lace front wig with a long braid.

Artistic Techniques, Concepts, and Creative Processes

Materials and Base Preparation

Use four 60 cm leaf front bases (Lisfronts) for the wig’s frame.
Choose matching bases carefully to avoid color mismatches.
Make a mock-up on a mannequin to determine dimensions (ears, front, back).
Corrugate and fit the base on the mannequin; identify missing areas (temples, back of the head).
Separate the front and back parts of the leaf front for different treatments.

Cutting and Profiling Kanekalon (Synthetic Hair)

Cut hair at 90° angles to avoid bald spots and ensure even layering.
Profile and thin out cut sections to reduce glue consumption and weight.
Optionally steam fibers with a steamer to smooth and set them before gluing.

Creating the Hard Helmet Frame

Use Titan glue (Russian Titan/Titan W) to pour the wig base twice, creating a hard, stone-like helmet.
Spread glue evenly using small-toothed pastry spatulas for deep penetration.
After partial drying, massage the cap to smooth out empty spaces.
Final drying takes up to 24 hours; leave helmet to cure for 3 days.
Use cling film on the mannequin to easily remove the hardened helmet.

Processing the Helmet

Trim ears and remove unnecessary gluey parts.
Smooth edges to prevent discomfort.
Add manual ridges (scallops) for wig comb attachment, sewn with thread and a curved needle.

Weaving Techniques for Lace Front

Use a hair clipper hook or bodice weaving hook with replaceable needles.
Standard knot method: hook grabs kanekalon, pulls ends through loop to form a large knot.
Large knots fill bald spots (rough knots), leaving about 1 cm edge for finishing knots.
Finishing knots are smaller, neater, made with 1–2 hairs each, placed along edges for invisibility.
Weaving the lace front is time-consuming (~80 hours total).

Gluing and Layering Back and Front Parts

Back glued in multiple layers: rough layer to build volume and fill gaps, followed by finishing layer.
Rough layers focus on strength, direction, and symmetry; glue may extend outside without concern.
Finishing layers require clean tools, minimal glue, and careful application to avoid visible glue spots.
Use varnish and steaming to shape and set layers.
Separate the lace front into two layers (bottom rough, top finishing) to prevent movement and add strength.
Assembly involves trimming excess, thinning, and gathering hair towards the center.

Structural Details

Leave a “window” in the glue assembly near the braid base for stability and better braid attachment.
Use titanium glue for helmet and rough layers; crystal glue for attaching braid base (foam rubber).
Glue patches can be added to fix density differences or gaps without redoing entire layers.

Final Styling and Finishing

Cut and thin out back and side areas for neatness and comfort.
Trim ear area closely for a firm fit.
Style side blush areas according to personal or original art preferences.
Use varnish, alcohol, and steamer for final shaping.
Final helmet weighs approximately 208 grams.
The braid will be created in the next part of the tutorial.

Summary of Key Steps and Advice

Choose appropriate base materials (Lisfronts), ensuring color and length consistency.
Make a mock-up on a mannequin to plan dimensions and areas needing weaving.
Cut Kanekalon carefully at right angles; profile and optionally steam before gluing.
Pour the base twice with Titan glue for a hard helmet, allowing full drying time.
Remove helmet carefully using cling film on the mannequin.
Sew wig comb ridges manually where missing.
Use a hook tool for weaving large rough knots and smaller finishing knots.
Glue back and front parts in multiple layers: rough then finishing.
Use varnish and steaming to shape and set hair layers.
Leave a glue “window” for braid attachment for stability.
Trim and style edges carefully for comfort and aesthetics.
Use clean tools and minimal glue during finishing to avoid visible glue.
The entire weaving process is lengthy and requires patience (~80 hours).
Alternate between weaving and gluing stages to manage workload.

Creators and Contributors

The tutorial is presented by a creator focused on wig making and styling.
The character inspiration is “Ruma” from the K-pop Demon Hunters cartoon.
The creator references their Telegram channels, VKontakte, and Boost platform for additional content and support.

This tutorial offers an in-depth, step-by-step guide to constructing a professional, durable, and visually accurate wig helmet base with detailed weaving and finishing techniques, ideal for cosplay or artistic wig making.