Summary of "Flat Roof Detail, Correct way to do it :)"

Main Ideas:

Importance of Slopes and Water Management: Proper slopes and water descent are crucial to avoid water accumulation on flat roofs.
Material Selection and Application: Choosing the right materials and application techniques is essential to prevent leaks and thermal bridges.

Formwork Installation:
- Install formworks for the roof structure.
Concrete Slab Construction:
- Place aerated Concrete Slab blocks.
- Pour concrete for the slab and allow it to cure.
- Remove the formworks once cured.
Parapet Construction:
- Install Formwork for the Parapet.
- Pour concrete for the Parapet and allow it to cure.
- Remove the formworks after curing.
Wall Construction:
- Build walls as part of the structure.
Thermal Insulation:
- Place the first layer of Thermal Insulation panels on the roof.
- Add a second layer of Thermal Insulation panels.
- Lay a polyethylene mattress for added insulation.
- Apply Thermal Insulation on the edges.
Waterproofing:
- Pour a sloped screed to ensure proper drainage.
- Apply the first layer of Waterproofing insulation, including on the Parapet.
- Apply a second layer of Waterproofing insulation.
Cement-Based Plaster Application:
- Manufacture cement-based plasters.
- Apply cement-based Thermal Insulation adhesive.
Parapet Cladding:
- Fix Thermal Insulation boards to the Parapet using plastic dowels.
- Apply cement-based Thermal Insulation plaster reinforced with plastic mesh.
Finishing Touches:
- Place Natural Stone Coping with mortar on the Parapet.
- Apply an exterior mineral coating primer.
- Apply the exterior mineral coating with a trowel.
- Finish with an exterior paint applied with a roller over the primer.