Video summary
Learning About Fabrics 1: The Who, What, and How
Main summary
Key takeaways
Summary
Zoe Hong introduces foundational vocabulary and production knowledge for understanding fabrics and communicating effectively with fabric sales representatives. Her central point is that a fabric is defined by both its fiber content and its construction. Calling something “silk,” for example, identifies its fiber, not the finished fabric.
Hong also argues that fiber and fabric technology are important to fashion’s future and can contribute to sustainability. While garment silhouettes are constrained by the human body, material innovation offers far more room for development.
1. Fibers: What Fabrics Are Made From
Fiber content helps determine how a fabric behaves, including its drape, breathability, strength, and ability to manage moisture.
- Natural fibers include:
- Plant-based fibers such as cotton, bamboo, and jute.
- Animal fibers such as wool, alpaca, and camel hair.
- Silk, which comes from silkworms.
- Manufactured fibers include oil-based fibers such as polyester, nylon, and spandex, as well as acrylic. Lycra is a brand name for spandex. Rayon and acetate are manufactured fibers based on plant material.
- Fibers can also be classified as:
- Staple fibers: Short fibers that must be gathered, carded or combed, and twisted into yarn. Cotton is a common example.
- Filament fibers: Long, continuous strands. Silk is a natural example; polyester can also be produced as a filament.
Blended yarns combine fiber properties. For example, a filament fiber may form a strong core while staple fibers are wrapped around it, combining strength with qualities such as softness, texture, comfort, or breathability.
2. How Fibers Become Finished Fabric
The typical supply chain runs from fiber producers to yarn mills, textile mills, and finishing operations:
- Fibers are produced by sources such as farms, herders, ranchers, or fiber factories.
- Yarn mills make yarns. Yarn is a strand of fibers twisted together and is a basic building block of fabric. Yarns may be simple or blended, and may have special textures or structures such as slub, tweed, chenille, bouclé, or elastic-core yarns.
- Textile mills construct fabric by knitting or weaving yarns into yardage. At this unfinished stage, the fabric is called gray goods.
- Finishing mills prepare the fabric. They may scour (clean) and bleach gray goods, then dye or print them. Prepared-for-dyeing fabric is called PFD; prepared-for-printing fabric is PFP. Designers may order these goods to create custom colors or prints.
- Finishes may be added for appearance or performance, such as a coating that makes fabric water-resistant.
Dyeing can happen at different stages—including the fiber, yarn, or garment stage—so the supply chain can vary.
3. Fabric Suppliers and Sourcing
Hong distinguishes among several types of businesses designers may encounter:
- Converters buy gray goods and arrange finishing or other processing to create fashion fabrics. They often have a recognizable aesthetic or specialty.
- Vertical mills handle many stages of production in-house, potentially from fiber and yarn through textile construction and finishing.
- Distributors help mills and converters get their fabrics to designers but do not make or finish the fabrics themselves.
- Jobbers sell surplus, canceled, slightly damaged, or leftover fabric. They can be useful for small runs and low-cost sourcing, but stock is often limited and usually cannot be reordered. Basic, widely available fabrics may be easier to replace than unusual ones.
Mills, converters, and distributors may provide samples, headers, or color cards. Sales representatives work with designers and merchandisers through appointments, office visits, or textile trade shows.
4. Key Fabric-Orientation Terms
- Straight grain: Runs lengthwise along the fabric. In woven fabrics, this is the warp.
- Cross grain: Runs across the fabric, perpendicular to the straight grain. In woven fabrics, this is the weft.
- Bias: The diagonal direction of the fabric, generally cut at a 45-degree angle. Bias cutting can provide extra stretch and flexibility, helping a garment fit smoothly.
- Face and back: The front and reverse sides of a fabric. If a designer chooses to use the back as the visible side, that choice must be clearly communicated to everyone working on the garment.
- Selvage: The finished edge of a fabric that resists fraying.
When discussing purchasing quantities, clarify what a piece means. A sales representative may use it to mean one roll, but the yardage per roll can vary. Ask how many yards are in a piece and confirm the price and quantity before ordering.
5. Four Broad Material Categories Used for Garments
-
Wovens
- Made by interlacing lengthwise warp yarns and crosswise weft yarns, typically at right angles.
- Common weave structures include basket, twill, satin, and jacquard.
- Wovens can fray at cut edges.
-
Knits
- Made from interconnected loops.
- Many knits stretch and do not fray in the same way as wovens, though their structures and behavior vary.
- Examples include jersey, double knits, openwork knits, loop pile such as terry cloth, and cut pile such as velour.
- Faux fur is treated as a knit category in the video because its knitted backing helps contain the pile and affects how it is constructed.
-
Nonwovens
- Made without conventional weaving or knitting.
- Felt is formed by matting fibers together, so it can be cut without fraying.
- Some interfacings are nonwoven and may include adhesive dots that melt when pressed, bonding the interfacing to the fabric.
-
Hides
- Include leather, suede, real fur, and shearling.
- Shearling combines a finished leather side with the animal hair or fleece on the other side; it is often one piece rather than a separate lining.
6. Choosing Fabric and Working With Sales Representatives
Fabric weight helps communicate intended use:
- Bottom weights are commonly used for pants, jackets, and sometimes coats.
- Coat weight signals a particularly heavy fabric.
- Top weights, sometimes called blouse weights, are lighter; some may also work as dress weights.
Hong recommends arriving at sales meetings with a clear, itemized plan. Describe the fabric’s intended use, fiber, weight, season, and desired print or appearance. The more specific the request, the easier it is for the representative to find suitable options and understand what the designer needs.
Fabric selection must also account for the body and garment function. A design can be highly experimental, but it still needs to be constructed so someone can get into it and take it off.
Speakers and Sources Featured
- Zoe Hong — presenter and sole speaker in the subtitles.
Rate this summary
Your feedback will help improve summaries.
Improve this summary
Reprocess with a stronger model when the summary feels incomplete or inaccurate.
Translate summary in another language
Ask questions to this video
Chat for follow-up questions, clarifications, and source-backed answers.