Video summary
How to Smooth PLA 3D Prints to Look Like Resin!
Main summary
Key takeaways
Summary
Chris demonstrates how to prepare rough FDM/PLA prints for a smooth, resin-like appearance before painting. Using a Mario figure and a Koopa print, he removes visible layer lines, support marks, scratches, and other defects through repeated sanding, filling, and priming.
The process is time-consuming and works best on relatively smooth, cartoon-like models. Heavy sanding can erase fine details, so Chris recommends smoothing only the parts that need it—or selected smooth sections of a more detailed model.
Process and materials
- Remove supports and inspect the print. Use cutters and pliers to trim leftover support material. Focus on visible areas; hidden surfaces may not need extensive finishing.
- Shape and clean rough spots. Use a Dremel with deburring bits for stubborn support marks or rough areas, applying very light pressure. A sharp pick or awl can clean edges while preserving molded lines.
- Sand progressively:
- Start with coarse 80-grit sandpaper or a sanding sponge to remove prominent layer lines and excess material.
- Move to 120- and 220-grit sandpaper to reduce coarse scratches and refine the surface.
- Use sanding sticks for crevices and narrow areas. A small DIY sanding block can help keep flat edges crisp.
- Sand in circular motions where possible. Avoid pressing hard or overworking rounded surfaces.
- Apply filler primer. Spray light, short passes of sandable filler primer, building up thin coats instead of trying to cover everything at once. Let the primer dry between coats.
- Inspect and smooth the primer. Lightly use fine 600-grit sandpaper to smooth the primed surface without removing too much material. On some areas, use 220-grit to reveal remaining holes or irregularities that need filling.
- Fill defects. Apply a small amount of plastic wood filler to cracks, support scars, and other gaps. Chris wets and smooths the filler during application to reduce excess sanding. Let it dry, then sand gently—generally with 220-grit sandpaper.
- Repeat as needed. Reapply primer over repaired or sanded areas, inspect again, and repeat filling and sanding until the visible surfaces are smooth.
Practical advice and safety
- Coarse sanding removes material quickly and can leave deep scratches, so use light pressure.
- Power sanding can overheat PLA, making it sticky or causing it to deform.
- Wear a respirator and safety glasses, and work in a well-ventilated area to protect against plastic dust and flying debris.
- The finished prints look substantially smoother and more resin-like, though some hard-to-reach imperfections may remain.
Creators and contributors
- Chris, from It’sMade / ItsMeaDMaDe, demonstrates the process.
- Chris thanks his Patreon supporters; individual names are not given in the subtitles.
Rate this summary
Your feedback will help improve summaries.
Improve this summary
Reprocess with a stronger model when the summary feels incomplete or inaccurate.
Translate summary in another language
Ask questions to this video
Chat for follow-up questions, clarifications, and source-backed answers.