이지캐드 파워(출력) 조절하는 2가지 방법 레이저마킹기 (주)레이저스 레이져마킹기

Summary

The video explains how to adjust a laser marking machine’s output intensity using the software’s Edit Defaults settings and the fill line-spacing option.

Settings

• Marking count: Controls how many times the machine marks the design. According to the presenter, adding passes can make each marking weaker.
• Speed: Controls how quickly the laser moves. A slower speed generally increases marking intensity because the laser spends more time on the material; a faster speed reduces it. The stated maximum speed is 2,000.
• Power: Sets the laser’s output level. Although the setting goes up to 100%, the presenter recommends staying at or below about 95% to avoid straining the equipment. The video mentions standard settings of “800 and 80,” apparently referring to speed and power.
• Balancing speed and power: Lowering power alone may not create a noticeable difference. The presenter suggests lowering power while increasing speed to make the change more apparent.
• Fill and line spacing: Enabling fill marks the inside of a shape rather than just its outline. A line spacing of 0.05 is presented as a general upper setting. Tighter spacing, such as 0.035 or less, creates denser passes and can increase marking intensity.

Guide covered

A practical tutorial on adjusting marking intensity using marking count, speed, power, and fill line spacing.

Main source: A presenter from ㈜레이저스 (Lasers Co., Ltd.).