Video summary

Peintures CAPAROL, tests et avis

Main summary

Key takeaways

Product Review

Product reviewed

Caparol (Capparole) solvent-based ultra-matte / velvet (velours / silk) ceiling paint — presented as a “paint tester” review, focused mainly on large ceilings and also covering spraying/rolling, coverage, drying, smell, and application limits.

The video also includes a second Caparol product for comparison: a microporous satin lacquer / top ventil base (more woodwork-focused), which is also solvent-based.

Main features & performance (Caparol solvent-based ultra-matte)

  • Type / finish: Ultra-matte with specular brilliance < 2.5 (at 85°). Described as very low-gloss and good at hiding flaws.
  • Application focus: Especially recommended for very large ceilings (notably > 25–30 m²). The reviewer claims it can handle ~60 m² ceilings with one person, helped by a long “open time” compared to acrylics.
  • Insulating / blocking function: Chalky paint with insulating/blocking benefit on substrates affected by soot, nicotine, and water damage.
  • Coverage / yield: Advertised 9–11 m²/L; the reviewer says it matches expectations and highlights it as a key positive.
  • Opacity: Very high opacity (“super opaque”); one coat may be enough depending on surface condition.
  • Consistency: Ultra-smooth with good projection, but can spread/spatter if you don’t adequately protect surrounding surfaces.
  • Drying / recoating:
    • Surface dry: about 4–6 hours (reviewer observed 6–7 hours)
    • Recoatable after: about 12 hours later (reviewer: “one day per coat”)
    • Manufacturer warning: attempting to double/cross too soon can cause problems.
  • Hardening / cure: Manufacturer indicates hardening over several weeks, so the ceiling should be handled carefully during that period.

User experience & practicality

  • Marking / roller marks: Strongly liked for ceilings; the reviewer claims it’s hard to leave marks, unless the user is clumsy.
  • Need for roller: Recommends a 12 mm roller sleeve (also mentions 12–13 mm as ideal). Claims it doesn’t spread much.
  • Skimming not needed: The reviewer says full skimming is pointless with this paint because it tends to leave some “imperfection” effect (small “apples” / surface artifacts mentioned).
  • Washability: Presented as washable and with a semi-matte velvet (“silk”) look, but the reviewer admits they haven’t verified on a job site.
  • Use cases: Suitable for walls and ceilings, and for substrates like plasterboard/plaster and interior woodwork (with a caveat that outdoor shutters are not implied).

Smell / ventilation (major drawback)

  • Odor: The reviewer says it stinks heavily because it is solvent-based.
  • Impact on rating: Smell is considered “normal” for solvent paints, but still affects the overall experience significantly.
  • Recommendation: Ventilate the room, otherwise it becomes unpleasant and potentially health-risky (the reviewer jokes about extreme consequences).

Ratings / scoring mentioned in the video

The reviewer uses a star-style scoring system.

Main ceiling paint (Caparol ultra-matte)

  • Opacity / tracing quality: 2 stars
  • Yield / value: 2 stars (based on 9–11 m²/L and overall quality)
  • Consistency: 1 star (easy to get product on surrounding surfaces; requires careful masking)
  • Smell: 0 stars
  • Overall line: “7-star sun” / a “very respectable” note; later described as among the best paints tested on the channel.

Second Caparol product (microporous satin lacquer / top ventil base)

  • Opacity / tracing: relatively opaque but tends to trace slightly vs PPG → 1 star
  • Smell: 0 stars
  • Value for money: 1 star (construction-grade)
  • Yield noted as 8–12 (up to ~11 m²/L), but the reviewer is disappointed despite it being “not wrong.”

Additional technical / application details

  • Airless spraying (for the first paint):
    • Use an airless sprayer
    • Nozzle 26–31
    • Atomization width 4 or 5
    • Pressure 150–180 bar
    • Notes: cleaning solvent-based paint is painful
    • Warning: some cheap DIY airless sprayers may not handle solvent-based paint.
  • Recoating window / sequencing warnings:
    • Stress on a 12-hour interval
    • Warns against “crossing/doubling” on fresh passes unless technical specs allow it

Notable “cons” / limitations (from the video)

  • Very strong solvent smell (major negative)
  • Spatter / hard-to-control consistency → requires protecting floors and furniture
  • Slow work rhythm because recoating effectively requires next day (~12 hours)
  • Long curing / hardening (weeks) → avoid rubbing or bumping afterward
  • Yield: considered good but not exceptional for the “velvet” category (still meets spec); also noted that yield matters at scale

For the second product (top ventil base): more issues with odor, value, and gloss, plus yellowing risk (see below).

Yellowing / color limitations (second product, but relevant caveat)

For the microporous satin lacquer (top ventil base):

  • Contains alkyd resin (solvent-based), and white can yellow over time.
  • Reviewer suggests choosing a different shade or a different paint if you want white to stay clean.
  • Notes brand guidance against certain dark colors in harsh thermal environments (thermal absorption / shocks), including examples:
    • Avoid anthracite gray in mountains
    • Avoid royal blue by the sea

Comparison(s) made in the video

  • Versus acrylic paints (open time):
    • Solvent-based product has long open time, helping on very large ceilings compared to acrylics.
  • Versus PPG:
    • Top ventil base may trace slightly compared to PPG.
  • Versus “better options for individuals”:
    • First ceiling paint: described as among the best tested on the channel for its purpose/category.
    • Second product: described as construction-grade, less ideal for individuals seeking better value.

Overall verdict / recommendation

  • Best for: Large ceilings where you want ultra-matte, high-opacity coverage with minimal visible roller marks.
  • Biggest trade-off: Strong solvent odor and slow recoating/work rhythm (about one day per coat).
  • Recommendation: If you can ventilate and plan for the 12-hour recoating schedule, the reviewed Caparol solvent-based ultra-matte ceiling paint comes across as a top-performing choice, ranked among the best on the channel for big ceilings.

Unique points mentioned (deduplicated)

  1. Part of a Caparol testing series; widely distributed in France; professional brand.
  2. Recommended especially for large ceilings (>25–30 m²) and very large areas (~60 m²).
  3. Solvent-based with long open time (advantage vs acrylics).
  4. Chalky insulation/blocking benefit for soot/nicotine/water damage.
  5. Ultra-matte finish; specular brilliance < 2.5 at 85°.
  6. Coverage/yield 9–11 m²/L, confirmed by reviewer.
  7. Very high opacity; one coat may suffice on less damaged surfaces.
  8. Consistency downside: can spread/spatter; protect floors/furniture.
  9. Smell is very strong → ventilation required.
  10. Value rated well for professionals; not too expensive for quality.
  11. Best-in-use characteristics: hard to leave marks; can look clean with normal technique.
  12. Airless spraying parameters + solvent compatibility and cleaning warnings.
  13. Manufacturer notes about hardening over weeks → avoid rubbing/bumping.
  14. Drying times: surface dry 4–6h (reviewer observed 6–7h).
  15. Recoat restriction: ~12 hours later (one coat per day).
  16. Warning not to apply second coat too soon (fresh-pass issues).
  17. Appearance described as semi-matte velvety (“silk”).
  18. Advertised as washable; reviewer hasn’t fully verified.
  19. Suitable on plasterboard/plaster and interior woodwork (not outdoor shutters implied).
  20. Anti-flash rusting explanation for screw heads / rust migration.
  21. Anti-flash rust stain fix exists (spray product mentioned).
  22. Yield critique: ~9 m² can add up on full sites.
  23. Mention of specular brilliance differences and category naming confusion across brands.
  24. Second product: microporous satin lacquer (top ventil base), solvent-based (includes siloxane + alkyd); glossier satin closer to lacquer.
  25. Second product yield 8–12 (up to ~11 m²/L) but reviewer disappointed.
  26. Second product smell problem → 0 stars.
  27. Second product value lower for individuals → 1 star; construction-grade.
  28. Second product specular gloss roughly 35–60°.
  29. Second product yellowing risk for white due to alkyd resin.
  30. Second product guidance: avoid certain dark colors in harsh thermal environments (thermal shock).
  31. The video avoids CVES/COV explanation because European regulations already set limits.

Speaker breakdown

  • Main reviewer / narrator (primary voice): Provides nearly all evaluation, star ratings, technical specs, and comparisons.
  • Occasional named/interjected speakers: Used mostly for clarifications/banter (e.g., anti-rust explanation). No separate structured scoring or alternate conclusions beyond the main reviewer’s statements.

Original video