Video summary

Eyebrow Lamination Transformation - Step by Step Tutorial

Main summary

Key takeaways

Product Review

Product / Treatment being reviewed

  • Mayami 3-step eyebrow lamination system (used throughout the tutorial)
  • Mentioned accompanying products:
    • LashGlo​w brow shampoo/foam: gentle cleanser for prep
    • HD Brows tint + developer: for tinting after lamination
    • Boots cosmetic buds: used for removing lift product and controlling tint
    • Warm cream wax + wax paper strips: for post-lamination shaping
    • Brow Essence / “oiling stage”: final nourishment step of the Mayami system, applied like oiling

Key features / how it’s used (step-by-step highlights)

  • Preparation (double cleanse)

    • Clean brows thoroughly to remove makeup and residue.
    • Brows must be completely dry before starting lamination.
    • Uses LashGlo​w shampoo/foam (noted as gentle; no sulfates/parabens; melts makeup).

  • Step 1: Brow lift (Mayami)

    • Root-to-tip application with an even coating.
    • No pre-glue chosen.
    • Development time: generally 6–15 minutes depending on hair density.
      • For the client example: 8 minutes total, checked at 6 minutes for malleability.
    • Uses films/covering to reduce lifting/checking effort.
      • Notes: too much film can tangle.

  • Reshape

    • Uses a dental brush to brush hairs into a lifted, fluffy/sweeping effect.
    • Continues brushing while the lift cream is being removed.

  • Remove lift + neutralize

    • Removes all lift product using cosmetic buds.
    • Neutralizes with a lightly damp cotton bud so hairs don’t continue developing/overprocess.
    • Wipes off remaining moisture/residue with dry pads.

  • Step 2: Sculpt (Mayami)

    • Applied with lip gloss applicators (preferred to avoid waste and constant re-application).
    • Emphasizes full coating of every brow hair (“more is better”).
    • Development time: matched to the lift time (8 minutes for the client).
    • Removed following the hair direction; firm but gentle pressure.

  • Tinting

    • Uses HD Brows tint + developer (Dark Brown).
    • Advises tint color should be discussed with the client.
      • Lamination can lighten/warm hair tones, requiring neutralizing even if the client doesn’t want darker results.
    • Tint develops faster due to porosity—monitor closely.
    • Tint removed in sections (front first) for a more natural finish.
    • Uses tint stain remover (tiny amount) on a cotton bud to stop further development.

  • Wax + clean-up

    • Adds a powder barrier under brows to protect skin before waxing.
    • Uses warm cream wax with a manicure stick.
    • Removes wax in the direction opposite hair growth, in three sections.
    • Post-wax oil to soothe, followed by dry cotton pad clean-up.

  • Final Mayami step: Brow Essence (“oiling stage”)

    • Applied as drops, then worked through with a micro/soft brush.
    • Goal: flatten hairs smoothly into the finalized position so they set.
    • Client aftercare: don’t get brows wet for at least 24 hours.

Pros mentioned

  • Flexible correction for unruly/coarse brows.
  • Creates brows that look thicker and fuller.
  • Improves symmetry and overall texture/finish.
  • Mayami system lamination described as lasting about 8 weeks on average.
  • After tinting, results are described as flattering and more refined.

Cons / cautions mentioned

  • Overprocessing risk if neutralization isn’t done properly (neutralize to stop further development).
  • Tint can continue darkening if tint-stain remover isn’t used.
  • Tint and development happen faster than normal because lamination makes hair porous—requires close monitoring.
  • Brows must be fully clean and dry before lamination or results can be affected.

User experience notes (what the tutorial emphasized)

  • Thoroughness is critical:
    • Double cleansing
    • Wiping dry
    • Applying even coatings
  • Application tools matter for control and consistency:
    • Lip gloss applicators for Mayami steps to reduce waste and simplify handling
    • Dental brush for shaping
  • Pressure guidance:
    • Firm but gentle during removal and set stages.

Comparisons made

  • No direct brand-to-brand product comparison is made for the Mayami system.
  • Only general contextual comparison is implied:
    • Lamination makes brows more porous, so tint develops faster than normal.

Unique points mentioned about the products/system (complete list)

  1. LashGlo​w cleanser: gentle, no sulfates/parabens, melts makeup.
  2. Double cleansing for makeup/residue removal.
  3. Brows must be completely dry pre-treatment.
  4. Mayami 3-step system used for lamination.
  5. Choice to not pre-glue brows.
  6. Brow lift step: even root-to-tip coating; aim ~30 seconds per brow for coverage.
  7. Development time guidance: 6–15 minutes; this client used 8 minutes total.
  8. Check at 6 minutes for relaxation/malleability.
  9. Use of film covering; too much film may cause tangling.
  10. Shaping tool: dental brush for lifted, sweeping fluffy effect.
  11. Remove lift thoroughly with Boots cosmetic buds.
  12. Neutralize to prevent continued development/overprocessing.
  13. Sculpt step: apply with lip gloss applicators to reduce waste.
  14. Sculpt step: full coating of every hair; “more is better.”
  15. Sculpt development time matches lift (8 minutes here).
  16. Tinting with HD Brows tint + developer (dark brown).
  17. Discuss tint goals with client; lamination can lighten/warm tones.
  18. Tint develops faster on laminated brows—monitor closely.
  19. Tint removal: in sections, start with the front.
  20. Use small amount of tint stain remover to stop development.
  21. Powder barrier under brows before waxing (skin protection).
  22. Waxing method: warm cream wax; apply slightly below brow line toward tail; twist stick; apply firm strips; remove opposite hair growth in three sections.
  23. Post-wax oil to soothe/remove residue.
  24. Tweezing final brow perfection after lamination/wax.
  25. Final Mayami step (“Brow Essence” / oiling stage): apply drops via bottle reversal + lip-gloss-style applicator; work through with micro brush.
  26. Aftercare: avoid getting brows wet for 24 hours.
  27. Results claim: lamination lasts about 8 weeks on average.
  28. Before/after outcome described: brows appear fuller/thicker with a flattering shape.

Ratings / numerical scores

  • No star ratings or numeric review scores given.
  • Numeric guidance included:
    • Mayami development time range: 6–15 minutes
    • This client’s lift time: 8 minutes
    • Sculpt time: 8 minutes
    • Duration claim: lasts about 8 weeks on average
    • Aftercare: keep brows dry for at least 24 hours

Overall verdict / recommendation

Based on the tutorial, the Mayami 3-step brow lamination system is recommended for achieving fuller, thicker-looking brows, correcting unruly hairs, and producing a smooth, set texture—provided that users follow careful prep, correct neutralization, and close monitoring during tinting to avoid overprocessing or overly dark color.

Speaker/role breakdown

  • Professional brow artist (primary speaker): provides the full step-by-step method, product handling tips, timings, and outcome interpretation (including aftercare and durability claim).
  • Client mentioned (“Natasha”): provides hair-density context (dense/normal thickness) and serves as the before/after example; no additional opinions given.

Original video