Modem D- Link 2730U /2750U को Router बनाओ how to use modem as a Router

What the video teaches (D-Link 2730U/2750U as a router)

• The video shows how to repurpose a telecom ADSL cable/telephone RJ45 modem (mentioned as models 2730/2750U) into a router.
• Main advantage: you can reuse the modem/router setup to use another internet connection (e.g., fiber/other connection) and extend connectivity to other rooms.
• It also suggests using the modem to enable internet sharing where cable/fiber is available.

Tutorial steps / guide (key settings)

1. Go to the modem Setup page.
2. Open Local Network.
3. Go to Line Interface.
4. Change the Line Interface IP address
   • The presenter warns about IP conflicts caused by service providers.
   • Recommends following the process shown in the video (an example IP-like value is mentioned).
5. Save/Apply.
6. Go to Local Network → DHCP Server.
7. Set DHCP server mode to “Non” (non-enabled) as instructed.
   • Then Apply.
8. After applying:
   • The modem’s internet status indicator (yellow) is expected to change.
   • Internet access should start working through the router configuration.

Wi‑Fi configuration notes

• The video notes that you can change the Wi‑Fi name (SSID) if needed.
• For security, it recommends:
  • Selecting the security option
  • Entering a new Wi‑Fi password
  • Applying changes
• The tutorial implies the password is updated after applying the security settings.

Troubleshooting / advice

• If internet doesn’t work, the presenter emphasizes that IP conflicts are a common cause.
• Following the proper IP/DHCP steps should resolve the issue.
• Viewers are encouraged to comment if they face problems.

Main speaker/source

• Unspecified presenter (tutorial/guide host) demonstrating settings on a D-Link 2730U/2750U modem GUI.