Video summary
Full chart process - July 5 - gxt anomaly course content
Main summary
Key takeaways
Main ideas / concepts taught (GXT anomaly course: “Full chart process”)
The speaker presents a mechanical trading framework for predicting and validating daily/4H expansion and reversal behavior using:
- Invalidations (when the idea is wrong)
- Equilibrium (EQ) of the previous day’s range
- Refined key levels inside that EQ region
- Fair Value Gaps (FVGs) and swing higher-lows / relevant lows
- A required sequence of market structure (“swing formations”) to confirm reversals/continuations
- Session-based logic (Asia → London → New York) for where reversals are expected
- Draw liquidity as an important “what are we trading toward?” filter
- Alerts for monitoring refined key levels and reversal/continuation triggers
Step-by-step methodology (detailed)
1) Prep before the day/session
- Look at the previous day’s range before the new day/session opens.
- Determine whether the day is likely to be:
- Continuation day
- Reversal day
- The initial anchor for invalidation is:
- Mark the EQ invalidation level derived from the previous day’s range
- The highest-probability area is framed as:
- Trading within a swing formation structure on multiple timeframes (referred to as “candle 2/3/4” concepts)
2) Define continuation vs reversal behavior (initial invalidation logic)
Continuation day
- Set equilibrium invalidation from the previous day range.
- Expect price to trade inside the swing formation probabilities:
- Candle 2 = reversal/resumption context
- Candle 3 & 4 = continuation context
- When reversal candle behavior is implied by the previous day:
Bullish reversal case
- Mark continuation from the upper half of the previous day’s range wick.
Bearish reversal case
-
Mark continuation from the lower half of the previous day’s range wick.
-
If dealing with continuation behavior from a bearish candle:
- Mark the relevant lower-half support area.
3) Refine the invalidation/key level (instead of using the whole prior range)
The speaker emphasizes that using the whole big range leads to losses.
- Choose a refined key level inside the:
- upper half range (or other relevant portion)
- This refinement is tied to expected candle phases:
- Protraction phase: wick formation into the refined key level
- Expansion phase: body expansion away after reversal
Key claim: There are “only two key levels” used for refinement:
- Fair Value Gap (FVG)
- Swing higher-low (relevant swing low)
4) How to find the refined key level
A) Refined key level via Fair Value Gap (FVG)
- Go to a lower “aligned” timeframe based on expected expansion.
- Example logic:
- If trading weekly expansion → find FVG on daily
- If trading daily expansion → find FVG on 4H
- Example logic:
- Mark the FVG level inside the previous day’s range.
- Expect price to:
- Open/low into this level
- Reverse in the wick
- Then expand away to continue
- If price does not react from this level:
- The idea is invalidated
B) Refined key level via Swing higher-low (relevant low)
Two ways are referenced; the first way is emphasized:
- Within the previous day’s range, identify the relevant low that is the only level that reversed.
- When price engages that relevant low:
- It should produce a wick and a reversal
- The reversal should then allow continuation
5) Full continuation/reversal sequence when a refined key level is engaged
This is described as a “move the goalpost” invalidation refinement process:
- Step 1: Mark EQ invalidation from previous day range.
- Step 2: Mark the refined key level inside that range.
- Step 3: Wait for a required reversal/swing structure (“swing formation”) on an aligned timeframe.
- Timing rule:
- If the refined key level is meant to produce the daily swing/high-low, then the high/low day should be created using a 1H or above swing formation.
- Example:
- If using an hourly refined key → wait for a 1H/30-min+ swing low structure.
- Timing rule:
- Step 4: When price creates the swing formation (“C2” formation):
- As soon as the C2 candle forms, the invalidation anchor tightens:
- the real invalidation becomes the C2 candle’s tiny range, not the original big EQ.
- As soon as the C2 candle forms, the invalidation anchor tightens:
- Step 5: After the swing forms:
- Expect expansion away (candle 2 → 3 → 4 behavior).
- Continuation is also linked to:
- FVGs that print after the low/high day is formed being respected.
If continuation fails at the FVG/swing stage
- If the FVG or swing formation is “solved” in candle 3 instead of producing expansion:
- A relevant low may form as a new invalidation level.
- If the candle consolidates instead of reversing:
- That consolidation implies price must “manage lows” and the cycle continues.
- You may need a new C2-level and EQ-marking again.
6) How continuation is expected to behave on the 4H timeframe (daily-to-4H linking)
The speaker repeatedly links:
- Trade 4H expansion candles away from the low/high of day
When price engages the refined key level:
- A 4H candle should reverse with a small wick into expansion.
- After the 4H close, continuation should proceed.
Then repeat the same structural logic at the next layer:
- Mark EQ of the prior range
- Find refined key level (possibly the gap created after reversal)
7) Handling cases where there is no refined key level
If the prior-day range lacks a clear refined key level—or price engages and consolidates without reversing:
- Wait for a swing-created refined level within the same candle’s range.
- The candle open/low creates a swing low that becomes the effective reversal reference.
- Invalidation becomes stricter:
- The idea is invalidated when EQ of the previous range is disrespected and there is “nothing left” to reverse from (described as too deep / not enough time left in the daily).
8) Session-based expected behavior (London/NY structure)
Asia → London reversal logic
- If looking for an Asia reversal:
- Expect London consolidation first.
- Best reversal setup described:
- Previous sessions consolidate or retrace, and the next session reverses/expands.
- When London reverses and expands:
- It creates gaps/key levels.
- New York should respect those gaps/key levels.
- When New York is continuing:
- It should create swing formations from those levels.
If Asia/London do not reverse properly → New York “last line of defense”
- If Asia or London:
- hits/refines key level but doesn’t reverse as required,
- Then require reversal from:
- Asia or London highs/lows
- If that doesn’t happen:
- continuation/reversal expectations are invalidated
9) “Formation of the daily candle” used as an additional bias/expectation check
At chart time, the speaker suggests checking:
- Has price engaged a key level and reversed?
- If yes → you know where continuation should come from next.
- If no → reversal location candidates include:
- session highs/lows
- relevant swing points
- gaps
- Whether the daily candle is forming:
- Open high first implies bearishness expectations (scenario depends on prior session profiles)
- Open low first implies bullishness expectations (scenario depends on prior session retracing rather than reversing)
10) Draw liquidity requirement (to avoid “pattern trading”)
Before committing to trades, the speaker emphasizes:
- There must be open draw liquidity (a target where price is “going to”).
- Without draw liquidity:
- trading becomes “blind pattern trading” (undesirable)
11) Alerts (how to operationalize the system)
The speaker provides “when and how to set alerts”:
- Alert at the refined key level
- When price engages, wait for closure confirming the next required structure.
- Use time-based checking
- For high/low formation, monitor 30-min or hourly closures depending on required structure.
- Alert at the “future opposing candle” that must be reached
- So a reversal structure can be produced (example given references CSD/relevant closure conditions).
- For continuation:
- Set alerts at the gap level expected to be respected.
Other practical rules / concepts emphasized
- Swing formations are required for reversals/continuations (you cannot force expansion).
- V-shaped signatures and “small wick” behavior are used as filters for higher-probability expansion.
- Goalpost shifting
- invalidation moves from broader EQ to tighter C2 candle ranges once C2 forms.
- SMT / PSP / strength-switch style confluence
- discussed as second-stage SMT-like confirmations, with some limitations by timeframe/structure.
- Trading frequency/bias
- the key is whether you engage with price properly, not whether your bias guess was correct.
Key speakers / sources featured
Main speaker
- The instructor delivering the lecture (name not explicitly stated in the subtitle text).
Mentioned sources/mentors (names appearing in subtitles)
- ICT Concepts / ICT
- Teaches / TTrades
- Kiko
- Udon
- Euro
- Cash FX (mentioned as a scam/fake mechanical strategy server owner)
- He Trades
- Jacob (credited with terminology related to “asset synchronization,” but not teaching how to trade it)
- MXM Trader
- Mint FX
- Albi
- Jacob / “asset synchronization” (terminology credited to Jacob)
Platform / organization references
- IM Academy / IML (described as pyramid-scheme style webinar)
- FTMO
- Discord server (multiple community mentions)