Hướng Dẫn Setup Swift Block Super Maglev UV | Mở Center Cap Thế Nào ?

Product reviewed

Swift Block Super Maglev UV (SPL block / “S-blocket UV” mentioned) — a DIY setup/tuning tutorial focused on improving speed, feel, and managing lens/damage risk.

The video emphasizes safely disassembling the center (“C-center / center cap”) first, including a method to open it without tools, followed by tension/screw adjustments, cleaning, and “loop” (lube) tuning.

---

Main features / what the setup changes

Performance tuning for Super Maglev UV via:

• Screw/tension adjustment across six faces
  • Default mentioned as level 5
  • 8 levels total
• Safe opening/removal of the center C connectors without tools, using built-in latches/spurs
• Cleaning method after disassembly
  • Use paper towel
  • Avoid wet wipes
• “Loop” / lube strategy
  • Different viscosity/thickness options referred to as green / yellow / white
  • Optional 10k
• Note to avoid magnetic parts during lubing
• Break-in period for smoother action after lubing

---

Key setup steps (user experience focus)

1. Prepare tools/materials

   • Mentions needing a screwdriver to adjust tightness/looseness
   • Mask preparation
   • Tissue for cleaning

2. Open the center cap (C) first

   • Warning: don’t fully disassemble first and then open—open center C first.

3. Open center C without tools (core unique instruction)

   • Center design described as having two latches
   • Uses gentle finger pressure plus a click on a spur/latch to pop it open
   • Emphasis:
     • Gentle force makes it easy
     • Wrong force/technique makes it hard and increases break risk
     • The video claims the connector is a steel connector and “won’t worry about breaking”

4. Tension adjustment logic

   • Claim: you typically only need to adjust tension once
   • Default suggestion:
     • Initial tightness is very strict/tight
     • Loosen by about one turn after opening the box
     • After ~one cycle, it becomes around level 3 (equivalent to cited V100 reference)
   • Uses even adjustment across six sides
   • Checks screw spacing/length alignment

5. Cleaning

   • Hardware described as “pretty clean”
   • Recommended:
     • Paper towel only
     • Avoid wet wipes/wet tissues due to rust susceptibility (metal connector)

6. Reassembly + center safety

   • Reassembly described as straightforward once the opening method is known
   • Safety note: don’t loosen screws too much, because they could touch a cable/center

---

Lubrication (“loop”) / feel tuning strategy

• Suggested combo approach:
  • Start with green + yellow
  • If still slow, add white
• Additional notes:
  • 10k is said to make the feel/sound grittier (and likely worse/slower)
  • Apply small quantities (examples: 1 drop at base, 1 drop at surface, or 2 spots)
  • “Don’t rush” due to break-in
    • The video suggests it plays for about a day for even break-in
• Claimed feel outcomes:
  • Smoother, more fluid
  • Less stiff

---

Ratings / numerical scores

• Tension levels: 8 levels
  • Default set to level 5
• V100-equivalence comparisons mentioned:
  • Initial tightness may align with V100 level 1 (tightest)
  • After ~one cycle: about V100 level 3
  • Target feel: roughly V100 level 3 to level 4
• Break-in timing: recommended ~1 day

(No explicit overall star rating / single numeric product score is provided.)

---

Pros (as stated or implied)

• Safe center opening without tools
• Steel connector robustness claimed (“never have to worry about it breaking”)
• Tension adjustment usually only once (after initial setup)
• Reported performance/feel:
  • Heavier than V100 but offers more control
  • After correct lube/tuning: smoother / less stiff
• Value claim
  • If found under 300k VND, described as “arguably unbeatable”
• Lens protection claim
  • Less prone to lens damage than Gun V100, attributed to thicker ABS plastic on edges/baseline parts

---

Cons / risks / downsides (as stated or implied)

• Incorrect opening/pushing/prying can make the center:
  • Very difficult to open
  • Higher break risk
• Tool/screw driving described as likely the hardest part
• Tuning depends on personal style:
  • Screw looseness can make results unpredictable
  • Too loose may require re-tightening
  • Too loose may risk contacting the cable/center
• Minor content-creation annoyance:
  • “Camera obstructed” / cramped filming area (not necessarily a product flaw)
• Some configurations may cause gritty sound
  • 10k is said to be particularly gritty/worse

---

Comparisons made

• Super Maglev UV vs Gun V100 / V100

  • Similar overall design principles (corner design said to be same as V100)
  • Edge design slightly different
  • Main structural difference: center connector
    • Super Maglev UV: metal
    • V100/Gun V100: plastic (implied contrast)
  • Feel:
    • Super Maglev UV is a little stiffer and heavier than V100
    • Heavier weight = more control

• Super Maglev UV vs “SPL” review earlier

  • SPL corner design claimed to match V100
  • Center uses metal connector
  • Same overall design philosophy claimed

• Lens damage

  • Super Maglev UV claimed less lens-damage prone than Gun V100
  • Reason: material difference (ABS plastic edges)

---

Unique points / consolidated checklist

• Tool-less center cap opening using two latches + spur clicking
• Recommendation to open center C first before disassembling the rest
• Need a screwdriver for tension adjustment
• Prep items: mask + tissue
• Cleaning guidance:
  • Paper towel only
  • Avoid wet wipes/tissues to reduce rust risk
• Technique guidance:
  • Gentle-force opening
  • Wrong technique increases difficulty/break risk
• Steel connector robustness claim
• Tension usually adjusted once
• Initial tightness guidance:
  • Default level 5 out of 8 levels
  • Loosen ~1 turn after unboxing
  • Approx V100 level 3 after ~one cycle
• Ensure six faces/screws are evenly set
  • Check screw length/spacing alignment
• Lubrication strategy:
  • green + yellow, add white if needed
  • Optional 10k for grittier feel (generally discouraged)
  • Apply lube in small amounts (example drop placements)
• Avoid magnetic part area during digging/lube
• Break-in loop: play about 1 day
• Claimed feel improvements:
  • Smoother, less stiff, more fluid
• Comparison claim:
  • Stiffer/heavier than V100 → more control
• Value claim:
  • Under 300k VND is “arguably unbeatable”
• Lens protection claim:
  • Less prone than Gun V100 due to ABS edge material
• Main user experience difficulty:
  • Setup difficulty mostly tied to screw driving
  • Final tuning depends on personal style

---

Speaker views (unique speaker contributions)

• Single main speaker throughout
  • No clear multi-speaker differentiation in subtitles
  • All instructions/comparisons/tuning opinions appear to come from the same presenter

---

Overall verdict / recommendation

Recommended if you want a V100-like cube feel with more control, and you’re willing to put time into initial tuning—especially center cap opening and screw/tension setup.

The video strongly claims:

• Safe tool-less center removal
• Good value under 300k VND
• Improved lens/damage resistance versus Gun V100

It also stresses that incorrect handling can make the center difficult to open and that you must perform careful, even tension adjustments.