Video summary

NX Tutorial for Beginners in Hindi

Main summary

Key takeaways

Technology

Summary of the Tutorial (NX for Beginners, Hindi)

The video is a step-by-step tutorial focused on modeling a 3D object in Siemens NX using sketches and solid features. The workflow repeatedly uses New part setup, units in millimeters, sketch-based plate/cutouts, cylindrical holes, and mirroring to build symmetric geometry.

Key Modeling Steps / Features Shown

1) Create a New Model

  • Click New
  • Select the model type
  • Set Units = millimeters

2) Create the Base Plate

  • Use Extract → Answer/Section → Rectangle to create a rectangle sketch
  • Define rectangle dimensions (the tutorial mentions comparisons/values such as 80, 120, and a computed/target rectangle dimension like 182)
  • Set thickness (commonly around 15)
  • Finish the sketch and create the solid using sketch-to-solid operations, then confirm with OK

3) Create a Circular Cut / Inner Feature

  • Use values mentioned in the tutorial:
    • Outer circle diameter = 80
    • Inner circle diameter = 32
  • Create a circle in sketch mode
  • Use Cut (subtract material; reverse direction is mentioned)
  • Thickness/depth is adjusted in different steps (mentions 20 and 15)

4) Create Rectangular Geometry from Corner Points

  • Use sketch tools such as corner / existing points
  • Enter dimensions (the tutorial mentions values like 15, 35, etc.)
  • Confirm the sketch and create the feature (actions confirmed using mouse actions / confirmation)

5) Mirror the Created Geometry

  • Select both objects
  • Use More → Mirror feature
  • Mirror across a partition/working plane (the tutorial references selecting a plane type such as an “e-paper/… plane”)
  • Confirm with OK

6) Create Additional “Upper Object” Features

  • Repeat circle-based sketch operations:
    • Outer diameter ~80
    • Inner/cut diameter ~30
    • Feature depth/height values like 15
  • Use the Hole / circle sketch + cut/subtract workflow again
  • Ensure placement using center point selection and dimension entry
  • Use reverse direction for subtraction where needed

7) Create a Cylindrical Hole (Diameter 32)

  • Sketch a circle on a selected surface
  • Apply constraints (center point)
  • Enter 32 as the diameter
  • Use Cut (subtract / reverse direction)

8) Finish and Apply Color

  • Open Edit Object Display / Properties
  • Choose a color
  • Confirm with OK to display the final part color

Review / Guide / Tutorial Emphasis

This tutorial is aimed at beginners and repeatedly demonstrates that you should:

  • Start with a new part
  • Define sketch geometry using dimensions
  • Convert sketches into solids using extrude / thickness (depth)
  • Create cutouts and holes using reverse direction / subtract
  • Use mirroring to avoid repetitive modeling work

There are no product reviews—this is purely instructional.

Main Speaker / Sources

  • Primary source: the tutorial creator/instructor (spoken narration matches the subtitles)
  • Software context/source: Siemens NX CAD (Sketch, Extract/Extrude, Cut/Subtract, Mirror, Object Display)

Original video