How To Make Custom 2x2" Square Photo Fridge Magnets | Step by Step DIY

Summary of the DIY process (2×2” square photo fridge magnets)

Artistic techniques / creative process shown

• Photo-to-template workflow using a Photoshop layout/template (with Canva mentioned as an alternative).
• Print + precision die-cutting to turn printed photos into exact square blanks.
• Layered magnet assembly (“sandwiching” components) using a press for alignment and bonding.
• Quality control during assembly, especially keeping the print clean and free of debris between layers.

Steps / workflow (as described)

1. Prepare the photos for printing

   • Drag and drop photos into a Photoshop template.
   • Alternative mentioned: the same can be done in Canva.
   • For large orders: use software that auto-prepares print files, so placement isn’t manual.

2. Print

   • Print takes about ~3.5 minutes per sheet (as stated).
   • While printing, prep other materials like additional files and shipping labels.

3. Cut the printed photos

   • Use a die cutting press to cut many pieces at once.
   • Alternative mentioned: hand cutters for smaller-scale runs.

4. Assemble the magnets (the magnet has five elements)

   • Metal base
   • Photo print
   • Myer/mylar (a layer described as requiring cleanliness to avoid damage)
   • Plastic bag/back
   • Self-adhesive magnet

Assembly procedure:

  - Place the **metal base** first.
  - Add and **carefully align the image**.
  - Add the **myer/mylar**.
  - Turn the press handle to **position 1** and press down carefully.
  - In **position 2**, add the **plastic back**, rotate the piece, and press again.
  - Final step: attach the **self-adhesive magnet** (timing of plastic back placement can vary).

1. Final sticking step + handling
   • There’s no strict rule on whether the plastic back is added before/after pressing—choose what’s easiest.
   • Ensure nothing gets between the image and the myer/mylar.
   • If the myer/mylar sheets are dirty, discard them rather than risk defective magnets.
   • Expect some workspace mess as part of producing multiple units.

Creators / contributors mentioned

• The main creator/instructor is referenced only as “I” (no specific name given in the subtitles).