Video summary
How to Install macOS Sequoia on AMD Ryzen PC Without Mac | Hackintosh | | Step By Step Guide.
Main summary
Key takeaways
Main ideas / lessons conveyed
- The video is a step-by-step Hackintosh guide to install macOS Sequoia on an AMD Ryzen PC without using a Mac and without TransMac.
- It covers:
- Preparing the correct OpenCore EFI files for the target system
- Creating a bootable macOS installer USB
- Booting the installer using OpenCore
- Installing macOS Sequoia after erasing the main drive
- Finishing setup and ensuring the system boots without the USB by installing the EFI to the internal drive
Method / instructions (detailed)
Prerequisites
- Download:
- The OpenCore package
- The required EFI for the target hardware (specific to the user’s system)
- If you already have an EFI:
- Update it using the referenced OpenCore/EFI creation guide (link mentioned)
- Tools / requirements:
- Rufus for erasing/writing the USB
- A USB drive (minimum 2GB)
- Working internet connection (USB router / USB-to-Ethernet adapter / Wi‑Fi)
- Python for creating the bootable USB (assumes Python is already installed)
Step 1: Create the macOS Sequoia bootable USB
- Use the “previous guide” referenced in the video to create the bootable USB (link provided / video referenced).
- After creation, confirm the USB is ready for installation.
Step 2: BIOS/UEFI setup and boot to installer
- Power on the PC.
- Enter BIOS and:
- Load BIOS defaults
- Exit BIOS and reboot
- Re-enter BIOS and change the required settings (exact settings not clearly transcribed)
- Exit BIOS and save changes.
- Insert the created macOS Sequoia bootable USB.
- Boot to the boot menu and select the USB (described as having a “W…” prefix in subtitles; exact naming unclear).
- Press Enter to boot.
Step 3: Boot with OpenCore and start installation
- OpenCore boots using an EFI DMG (as described).
- Wait for it to reach the installer.
- In the installer:
- Select preferred language
- Click the right arrow to proceed
Step 4: Connect to the internet (before installing / when needed)
- Ensure internet is connected before proceeding (USB router / USB-to-Ethernet / Wi‑Fi).
- When prompted:
- Open Disk Utility
- Click Continue
- Click View
- Click Show All Devices
Step 5: Erase the target drive
- In Disk Utility:
- Select the main drive (not partitions)
- Click Erase
- Erase using the parameters mentioned during the walkthrough (not clearly readable in subtitles)
- Close Disk Utility.
Step 6: Install macOS Sequoia
- Select Reinstall macOS Sequoia
- Click Continue and proceed through the installer screens.
- If “Continue” doesn’t work:
- Quit the install and continue again (as stated)
- Expect:
- Multiple restarts during installation
- Installation time depends on internet speed
Step 7: Finish macOS setup
- When the Sequoia setup screen appears:
- Set up macOS according to preferences
- VoiceOver accessibility:
- macOS includes VoiceOver
- Turn on with Command + F5
- For more help/prompts during setup, press Escape (per subtitles)
Step 8: Make the PC boot independently (without the USB)
- After reaching the Sequoia desktop:
- Mount the ESP (EFI System Partition) of the system drive
- Copy the EFI folder from the USB
- Paste it into the EFI partition of the internal system drive
- (Subtitles mention “EFI ESP” and the paste steps; exact handling details are unclear)
- Restart the PC
- Boot into macOS without using the USB
Step 9: Confirmation
- The video concludes that:
- macOS Sequoia installs successfully on an AMD PC
- The example hardware is AMD Ryzen 5 700G with Radeon graphics
Speakers / sources featured
- Speaker/Creator: “Hey guys…” (primary channel host; no name provided in subtitles)
- Sources mentioned:
- OpenCore package (software)
- Rufus (USB writing/erasing tool)
- Python (used for creating the bootable USB)
- “My button” / “my button guide” / “previous guide” videos (referenced, titles not provided in subtitles)
- Forum (mentioned for in-depth guides/questions; forum name not provided)