How to get faster internet in just 1 minute

Summary of the video (tech steps to improve internet speed)

Goal

Increase internet speed quickly using a set of Windows network tuning steps, including:

• CMD commands
• Wi‑Fi/Ethernet adapter power settings
• DNS changes

Step 1: Run commands in Command Prompt (Admin)

1. Open Command Prompt (CMD) as an administrator.
2. Copy and paste the commands one at a time (as listed in the video description).
3. These commands are intended to optimize network performance.

Step 2: Tune Wi‑Fi adapter settings (Device Manager)

1. Open Device Manager.
2. Go to Network adapters → double-click your Wi‑Fi adapter.
3. Open the Advanced tab.
4. Disable all power-saving settings.
5. Set:
   • Roaming aggressiveness → Lowest
   • Transmit power level → Highest
6. Click OK.

Step 3: Tune Ethernet adapter settings (if using Ethernet)

1. In Device Manager, open your Ethernet adapter → Advanced tab.
2. Disable all power-saving settings.
3. Enable RSS / Receive Side Scaling.
4. Click OK.

Step 4: Run another CMD command

1. Open CMD as administrator again.
2. Paste one more command from the video description.
3. Press Enter.

Step 5: Change DNS settings (Control Panel)

1. Open Control Panel → Network and Internet → Network and Sharing Center.
2. Click your connection → Properties.
3. Open Internet Protocol Version 4 (IPv4).
4. Select “Use the following DNS server.”
5. The video recommends testing different DNS servers to find the one that gives maximum speeds.

---

Key speakers / sources

• No specific person is identified in the subtitles.
• The source appears to be the video narrator/instructions (no named expert or channel mentioned).