Video summary
@TeslaRaj gives feedback about the Tein EnduraPro for his Tesla Model 3. Is it that good?!?!
Main summary
Key takeaways
Tein EnduraPro Shocks for Tesla Model 3
Product and installation
The Tein EnduraPro shocks are non-adjustable replacement shocks, so their stiffness cannot be tuned. The video describes them as an affordable option: the shocks cost under about $600–$700, while installation with tax was quoted at roughly $1,300–$1,400 in the Bay Area.
The set shown was for an all-wheel-drive Model 3. Raj’s car is a rear-wheel-drive Long Range, which uses a slightly different rear-shock design. The shocks were installed on his Model 3, which was already lowered on Eibach springs. The car had about 66,000–67,000 miles, and Raj had driven roughly 1,000 miles on the new shocks by the time of the review.
Ride and user experience
Raj noticed the improvement most clearly on longer freeway drives, including a roughly 300–350-mile round trip. He described the ride as noticeably smoother and more comfortable, with less harshness over bumps and potholes.
The ride still communicates the road—it does not feel like “gliding on air.” Raj said the shocks did not make the car overly bouncy or feel like a “rice rocket.” He was pleased with the upgrade and said he would not have known to make it without the installer’s advice. He emphasized that this was his honest view, not a paid endorsement.
The installer demonstrated that the old OEM shocks returned very slowly after being compressed, while the Teins rebounded more promptly. Raj said the difference in how the car handled rough roads was clear.
The installer also said shock upgrades can make the car quieter. Raj found that difficult to judge because his early Model 3 has road-noise issues, including single-pane glass, but he felt the overall driving experience improved.
Benefits and limitations
Pros
- More comfortable and composed ride than Raj’s worn OEM shocks.
- More responsive shock return, which the installer said can help the tires recover after impacts.
- Considered a cost-effective option compared with replacing the full suspension.
- The installer said the shocks may be worthwhile even on newer Teslas, whose suspension has improved over the years but may still benefit from an upgrade.
Cons and caveats
- The EnduraPro is not adjustable, so its stiffness cannot be customized.
- The purchase and installation still represent a significant expense.
- The video does not isolate the shocks’ effect on efficiency or road noise; other changes were made at the same time.
Other work and comparisons
During inspection, the shop found that Raj’s rear tires were wearing heavily on the inside and beginning to show cords. Lowering the car had increased rear-wheel camber, and the original setup lacked adjustable rear camber arms. The shop added adjustable arms to correct the wheel angle and replaced the tires. These repairs addressed tire wear separately from the shock upgrade.
Raj reported efficiency of around 230 Wh/mi after the work, compared with roughly 280 Wh/mi previously and over 300 Wh/mi when he had larger 20-inch wheels. Because the wheels, tires, and alignment-related parts also changed, the video does not establish that the shocks alone improved efficiency.
The replacement tires were wider 245s rather than the original 235s. They were all-season tires and were expected to be better suited to winter conditions.
The installer compared the Teins favorably with Tesla’s evolving factory suspension. They noted that some Model Y owners consider buying a newer Tesla suspension kit for about $1,000–$1,200, while the Tein shocks alone were described as costing under $700. Adjustable shock options were also mentioned, particularly for a future Model Y installation.
The installer noted that early Model 3s, such as Raj’s 2018-era car, may be especially due for shock replacement. Tesla has revised its suspension over later model years.
Verdict
Raj’s experience was strongly positive: the Tein EnduraPros made his lowered Model 3 substantially more comfortable and better controlled over rough roads. They look like a sensible upgrade for owners with worn factory shocks who want improved ride quality without replacing the full suspension.
The main trade-off is that they are non-adjustable. The review’s observations about efficiency and road noise cannot be attributed to the shocks alone.
Speakers’ perspectives
- Raj, the owner: Focused on the real-world change. He initially felt the car was only “okay” after installation, but noticed a clear improvement on longer drives and was pleased with the smoother ride.
- The installer/host: Emphasized the old shocks’ poor rebound, the Teins’ value, and their potential as an upgrade for both older and newer Teslas. The installer also discussed the separate tire-wear and camber-arm issues uncovered during inspection.
Rate this summary
Your feedback will help improve summaries.
Improve this summary
Reprocess with a stronger model when the summary feels incomplete or inaccurate.
Translate summary in another language
Ask questions to this video
Chat for follow-up questions, clarifications, and source-backed answers.