Video summary
المستوى الثاني- الدرس ١٠: أمثلة تطبيقية على استراتيجية الدخول باستخدام الأوردر بلوك و البنية السعرية
Main summary
Key takeaways
Main ideas, concepts, and lessons conveyed
Purpose of the lesson
- This is the final lesson of Level 2, focused on practical applied examples of concepts previously taught.
- The instructor emphasizes that you should:
- Write down everything
- Understand each part
- You’re encouraged to prepare materially (e.g., Word/PDF) and practice what’s taught.
Core framework (repeated throughout)
Use the same overall structure each time:
- Pick and identify the timeframes you’ll work with
- Explicitly use a rule of thumb related to “divide by 5.”
- Don’t go too low
- Very small minute timeframes can create confusion and questions.
- Focus on specific structural elements:
- The market structure “break” (identify what broke structure).
- The correct swing focus:
- Prefer the outside swing rather than the inside swing.
- The speaker notes they previously explained this and stresses not to over-focus on the broken swing you’ll handle later.
- Liquidity zones:
- Target liquidity zones that align with the base/bias, not against it.
- PDRI usage:
- The lesson says they use only the “order block”.
Order block entry logic
- Entries connect to an order block zone and are validated using rules (and sometimes supplemental tools).
-
The lesson contrasts:
-
Higher-quality alignment (order block + liquidity + structure conditions match cleanly)
-
vs unfavorable scenarios (order block doesn’t align well or is positioned poorly relative to liquidity)
-
-
A key emphasis:
- Use timers/waiting rules for entries
- Don’t take instant entries immediately.
Managing trades and learning from outcomes
- Trading mindset:
- If a trade loses, stop thinking about it during the trading week and move to the next setup.
- Do learning review later (e.g., weekends / when there’s “no money on the line”).
- Experimentation is allowed:
- Backtest and record what works (e.g., entry timing or which liquidity/targets are hit).
- Rules are described as not “written in stone,” but must stay logical across timeframe changes.
Entry “types” referenced
Across levels, three entry types are referenced:
- Risky entry
- Described as: “submit your application and that’s it.”
- Entry based on accreditation
- Same type described in Level 1.
- Entry covered in this level
- Focused on order blocks / structure / liquidity conditions.
Methodology / instruction-style steps
A) Timeframe selection and mapping
- Identify the timeframe(s) you will trade from.
- Use a relationship described as:
- choose a setup where you can divide by 5.
- Example concept: drawing context from hourly and 12-minute timeframes.
- Avoid going too low (e.g., ~2-minute zones) because it increases confusion.
B) Structure + swing focus
- Identify the structure break relevant to the setup.
- When deciding swing emphasis:
- focus on the outside swing.
- Treat the “broken swing” used for learning as something you don’t need to worry about later—focus forward.
C) Liquidity alignment
- Identify liquidity zones tied to the condition being traded.
- Decide whether liquidity is:
- with the base/bias (preferred)
- or against the base/bias (avoid for the main entry idea)
- Prefer entries that take liquidity in the direction of the base.
D) PDRI usage (order block only)
- From PDRI, use order blocks (as explicitly taught).
- Don’t rely on other PDRI components in this method unless later explained.
E) Order block selection and validation
- Find an order block zone formed by a qualifying candle (a strong/large candle is implied).
- Evaluate whether the order block is:
- Better when positioned well relative to liquidity
- Worse when it’s below liquidity (the gold example warns this can complicate placement)
F) Timing rules (“timers”)
- The instructor emphasizes waiting rather than entering immediately.
- Entry is allowed according to the timers provided:
- Examples mentioned: 15 minutes, 1 hour
- If it fails, try a third time
- Another window mentioned: 10 minutes as a condition-check period
G) Confirmation and “Make Sure”
- Repeatedly confirm that conditions are truly met before committing.
- If price doesn’t break as expected:
- use “Make Sure” logic
- apply additional waiting/confirmation steps until alignment occurs
H) Entry location and order placement logic (general pattern)
- Place entry based on:
- the plan tied to the order block
- and the observed market structure
- Examples describe entries such as:
- below the order block / within a first swing area
- or at a later level after a bounce/return into a zone
- If price returns to the order block zone and intersects confirmation areas:
- a second entry opportunity may be allowed with more confirmations.
- Alternative entry methods are acknowledged as existing elsewhere, with risks said to be explained later.
I) Targets and trade management
- Look for a peak (swing high/target reference) price can reach.
- Examples include profit distances like:
- 2.5x (“two and a half” units)
- sometimes extending to 3.5 depending on market behavior
- Once the target is hit / the plan completes:
- stop taking additional trades in that sequence
- then watch higher timeframes for future setups
J) Review discipline
- During the trading week:
- don’t review losses while still trading
- if you lose, move on immediately
- Review learning on weekends / later periods without financial risk.
K) Learning loop / backtesting + recording
- If something works:
- record it
- If something doesn’t:
- record that too
- Practice on multiple pairs (suggested: two pairs).
Two practical examples shown (high level)
Example 1 (described as “right / Japanese one”)
- Uses 4-hour as the primary timeframe context.
- Demonstrates:
- identifying an order block after a structure break
- using timing windows (quarter hour / hour / other wait checks)
- waiting for price behavior around the order block with “Make Sure” confirmations
- Notes about performance:
- order block holds reliably 75%
- fails 25%
- Mentions possible alternative entry timing/logic via additional zones (including delaying the order block or using another confirmation label such as “FG”).
Example 2 (described as “gold”)
- Gold is framed as highly volatile (“rabbit maker / widow maker” warnings).
- Uses the same method:
- order block + structure + liquidity + timeframe discipline
- Key points:
- determine liquidity zones first on the higher timeframe
- evaluate how the order block position relative to liquidity affects difficulty and hit probability
- move down to lower timeframes for entry triggers, while warning that going too low can reduce hit probability
- Includes guidance:
- when price returns to an intersection area and produces second-entry confirmation
- using targets based on measured distance (e.g., “two and a half” example)
Speakers / sources featured (as stated in the subtitles)
- The instructor / main speaker (unnamed in subtitles; delivers all explanations)
- Michael (referenced as someone whose prior naming/approach is mentioned and discussed)
- Music / “[Music]” (audio cue only)