Peinture Leroy Merlin Luxens, mon avis

Product reviewed

Leroy Merlin “Luxens” multi-surface paint (used in a very dark matte tinted color on interior kitchen walls).

Key features mentioned

• Multi-surface use (“Multi-Surface”) for interior walls (kitchen).
• Acrylic paint: the color looked fairly strong in the can, but on the wall it became more intense.
• Matte finish with a dark tinted look.
  • The reviewer would have preferred velvet, but for this shade the product was only available in matte.
• Water-based / acrylic:
  • The reviewer notes there’s water in the paint and discusses mixing/adjusting dye.
• Low drips / easy application:
  • During the first coat it hardly dripped and went on easily.

User experience (application)

Preparation

• Used partial protection for surrounding kitchen elements (mainly around the cooktop).
• Repaired/covered an uneven wall area (knob/patch area) and protected taps.
• Applied with rollers + brush, using long strokes for trim.
• Reused a paint refill, and let it dry outside before reusing.

Application

• Under good conditions (~25°C), the reviewer managed both coats in one morning.

Drying

• Expected to be dry to the touch in about 30 minutes, but the reviewer observed it wasn’t fully dry even after ~30+ minutes.
• The reviewer attributed this mainly to ambient humidity.
• They clarify humidity affects drying speed, not directly staining/marks (though marks can still appear from handling).

Pros (advantages)

• Smooth application: goes on easily and hardly drips.
• Good first-impression coverage: after coat 1, it “looks good.”
• Aesthetic potential: the reviewer liked the very dark shade and intended it to make the kitchen area stand out.

Cons (problems / drawbacks)

1) Dark tinted matte color issues (main complaint)

After drying, the reviewer found a streaked / blotchy look, described as:

• “Little streaks of different shades”
• As if the dye wasn’t mixed properly

Even though they stirred, the color still appeared uneven, suggesting a problem with colorant/dye mixing and/or transparency/coverage for very dark tones.

Extra coats needed:

• The reviewer expected 3 coats would cover it (theoretically “three coats should cover it”).
• In practice, they still needed an additional “last” coat after seeing streaking.

2) Matte surface is delicate

• Leaves marks if touched.
• The reviewer advises you should not wipe/wash it—wiping with a sponge can leave marks.
• Matte finish is not very forgiving once applied.

3) Coverage and cost effectiveness

• Two coats were not enough; they needed three coats (partly due to darkness).
• The reviewer considered it overpriced for a large DIY store product—especially since the dark shade makes coverage harder.

Comparisons / context given

• Darker shades = more complicated

  • The reviewer repeatedly warns: the darker the shade, the more likely you’ll see streaking/flaws and need more coats.
  • Advice: choose lighter shades or medium colors (up to about half as dark).

• Factory-mixed base/colorants

  • Dark tinting requires a transparent base and is handled at the factory, which costs more.

• Store experience / pricing confusion (Leroy Merlin)

  • The reviewer found the paint section confusing and overly segmented by “themes.”
  • Similar products appeared at very different prices (e.g., €12 vs €38–€50), making it hard for individuals to choose.
  • They contrasted this with professional suppliers, where guidance is clearer.

• Competition mentioned

  • They referenced testing other brands (details not included), including a low-cost matte white at €5.48 per liter, which made Luxens seem less compelling for value (especially in dark shades).

Pricing / numbers mentioned

• ~€40 for a 2.5 liter can (at Leroy Merlin).
• Rough coverage rate claimed: ~9 m² per liter (matte).
• Because it required 3 coats, effective coverage became less cost-effective.
• The reviewer felt dark paint became expensive.
• Competitor note: matte white ~€5.48 per liter (for a different brand/product they tested).

Overall verdict / recommendation

Verdict: The paint seems to apply well, but very dark matte tinted colors can show uneven dye mixing/streaking and may require 3+ coats. The matte finish is also very touch-sensitive—don’t wash or wipe.

Recommendation: Use cautiously for ultra-dark matte tones. Consider lighter/medium shades and plan for multiple coats. If you must go dark matte, expect extra cost and be meticulous with mixing and application. For value, the reviewer favors lighter colors or professional-grade guidance/suppliers rather than relying on a DIY store’s confusing selection.

Unique points mentioned (consolidated)

1. Luxens “Multi-Surface” acrylic paint intended for surfaces (reviewed on interior walls).
2. Works with tinted shades; this review focused on a dark tint.
3. Matte finish; velvet would be preferred but wasn’t available for this shade (per the reviewer).
4. Dark acrylic tint looks more intense on the wall than in the can.
5. Matte is delicate: touching/wiping leaves marks; avoid washing.
6. First coat performance: easy application, hardly drips.
7. Drying time varies with ambient humidity.
8. Streaking/blotches attributed to poor dye mixing and/or coverage/opacity mismatch in very dark tones.
9. Needed three coats; two coats insufficient.
10. Mixing/stirring matters; techniques used to blend roller strokes.
11. Shade choice strongly impacts results: darker shades increase visible flaws.
12. Value concern: ~€40 for 2.5L, with coverage worsened by 3 coats.
13. DIY store selection felt confusing; pros offer clearer guidance.
14. Performance viewed as worse for very dark matte; prefer lighter/medium tones.

Different speaker views/aspects

• Single main speaker (the reviewer) covered:
  • On-site preparation and application technique
  • Drying/humidity effects
  • Visual quality problems (streaking)
  • Matte handling drawbacks (marks; no wiping/washing)
  • Pricing/value concerns and store-selection criticism
  • General guidance: choose lighter colors or use professional guidance