Record Cleaning! VEVOR Ultrasonic VS Humminguru: A Comparison

Product(s) Reviewed / Compared

• Humming Guru ultrasonic record cleaner Around $400 — “set-and-forget,” 1 record at a time

• VEVOR ultrasonic record cleaning tank system Around $200 or less (often with a discount link) — up to 8 records at a time (Subtitles reportedly show “VEVOR” / “vore.”)

Key Features Mentioned

Humming Guru

• Simple operation: pour water, insert record, press buttons.
• Automated workflow: ultrasonic cleaning cycle, then drains water and dries the record automatically.
• Capacity: 1 record per run (unless using optional adapters).
• Uses a small reservoir filter; the reviewer notes water can be reused as it filters.

VEVOR Tank System

• Large capacity: cleans up to 8 records at once, and can be adapted for 10” and 7” records (reviewer claims successful use).
• Kit includes separators/racks:
  • Plexiglass spacer sheets / separators keep records apart so liquid/ultrasonics reach between them
  • Plastic liners that must be peeled off
• Heating + rotation:
  • reviewer pre-fills with distilled water
  • rotates records
  • uses an internal heater to reach 30°C
• Cleaning approach: pre-clean is essential, done before the ultrasonic tank cycle (brush/wet cleaning first).

Pre-cleaning & Fluids (User Experience)

• The reviewer emphasizes pre-cleaning before ultrasonics:

  • Dry brush to remove loose dust
  • Wet cleaning with a brush to remove major dirt
  • Then ultrasonic cleaning for “details” (fine groove dirt)

• For the VEVOR:

  • despite common claims of 30 minutes at 30°C (86°F) and suggested solutions,
  • the reviewer says distilled water alone (after proper pre-cleaning) worked great.

• For both machines:

  • Ultrasonic cleaning is best for fine grime and groove-level defects like clicks/pops/ticks.
  • No ultrasonic cleaner removes scratches—scratches remain.

Pros / Cons Highlighted

Humming Guru

Pros

• Very easy, low effort (“set and forget”).
• Convenient cycle includes drainage/drying.
• Reviewer reports good results, even improving some previously poor-sounding records.
• Water reuse supported via an internal small filter.

Cons

• Higher cost: ~$400 (and ~$700 mentioned for a “Humming Guru Nova” upgrade).
• Only 1 record per run, reducing efficiency versus tank models.
• May require optional adapters for 10” and 45 records.

VEVOR

Pros

• Much lower cost: about $200 or less with discount.
• Batch efficiency: up to 8 records at once.
• Works well when pre-cleaning is done properly.
• Reviewer expects heavy use; calls it a “good machine.”

Cons

• Assembly is labor-intensive:
  • many parts
  • instructions are described as almost non-existent, requiring other videos to assemble
• Requires more physical handling due to setup, spacers/separators, and batch loading.
• Reviewer defends multi-record spacing effectiveness, arguing ultrasonics should still work because they’re used for intricate items (example analogy: dentists/medical instruments).

Comparisons and Arguments Made

• What ultrasonics do best: remove micro-dirt in grooves, not large debris.
• Critique of some demos: reviewer criticizes videos that drop dirty records straight from sleeves into the tank; the visible grime is mainly debris that should have been pre-cleaned first.
• Efficiency comparison:
  • VEVOR: batch cleaning (up to 8)
  • Humming Guru: single-record convenience, but slower overall
• Time/temperature vs results:
  • reviewer uses distilled water only
  • runs 15 minutes at 30°C
  • says 15 minutes worked great, suggesting 30 minutes may be overkill

Numerical Details / Specifics Mentioned

• Humming Guru price: ~$400
• Humming Guru Nova upgrade: ~$700
• VEVOR price: ~$200 or less (with discount code)
• Tank operation temperature: 30°C (86°F)
• Common manufacturer-style claim: 30 minutes
• Reviewer’s method (VEVOR): 15 minutes at 30°C
• Ultrasonic explanation (from subtitles): transducers vibrate water about 40,000 times a second

Overall Verdict / Recommendation

• Choose Humming Guru if you value convenience and simplicity: ~$400, “set and forget,” easy workflow, good results.

• Choose VEVOR if you want better value and batch efficiency: ~$200 or less, up to 8 records at once, but it demands more setup effort and careful pre-cleaning.

• Reviewer’s stance: both work well, but performance depends heavily on proper pre-cleaning. Ultrasonics aren’t scratch removers, but they can significantly reduce clicks/pops/ticks and improve sound.

Unique Points (Consolidated)

1. Reviewer has used record cleaning tools for years; previously recommended Spin-Clean and brushed/wet cleaning methods.
2. Ultrasonic cleaners used to be expensive; prices dropped over time. Tanks are good at fine groove cleaning.
3. Humming Guru automates draining/drying and is easy, but costs more and cleans one record at a time.
4. VEVOR cleans up to 8 records; however, kit assembly is complex and instructions are minimal.
5. Dry brush + wet brush pre-cleaning is crucial to protect the tank and maximize results.
6. Reviewer uses distilled water only in the VEVOR tank, doubting complex additives when pre-cleaning is done.
7. Reviewer claims 15 minutes at 30°C is sufficient and calls longer cycles potentially overkill.
8. Ultrasonics can reduce audible defects (clicks/pops) but cannot remove scratches.
9. Reviewer defends multi-record tank effectiveness using analogies to industrial/medical ultrasonic cleaning and experimentation.
10. Possible workflow improvements: best way to filter/reuse tank water for later batches.
11. Compatibility notes: - Humming Guru needs an optional adapter for 10” and 45s - VEVOR can be adapted for 10” and 7” with modifications

Speakers / Perspectives

• Bill (main reviewer/host) Provides most details: comparisons, setup experience, and experimental claims (15 minutes cycle, distilled water success, scratch/click discussion).

• Abby (intro/mention) Appears briefly for channel introduction; no specific product opinion beyond that context.