Video summary
EinStar 2 vs EinStar Rockit – First Scan, Full Hands-On Test
Main summary
Key takeaways
Overview
The video compares the EinStar 2 and EinStar Rocket using scans of a metallic part, a detailed camera, and a person. The reviewer is impressed by both scanners’ value and ease of use, but emphasizes that neither replaces a metrology-grade scanner when guaranteed accuracy is essential.
Main Features and Differences
- Both are compact, handheld, wireless scanners that use infrared scanning and the same software. The reviewer says the software is free, with no license or subscription fees.
- Both use removable rechargeable batteries. The reviewer says they can be swapped by opening the back, though he is unsure of the battery type.
- The EinStar 2 uses parallel laser lines for fine detail.
- The EinStar Rocket has 38 cross-hatched laser lines—19 on each side—and adds markerless laser scanning.
- The reviewer describes the EinStar 2 as much smaller than the original EinStar, roughly the size of an iPhone 14 Pro, though thicker.
- Both scanners have onboard buttons for starting scans and adjusting settings such as brightness. The reviewer found the wireless connection and scanning highly responsive.
Scan Results and User Experience
Metallic Light-Shroud Part
The EinStar 2 captured a useful scan quickly at 0.5 mm resolution. The reviewer cleaned up and aligned two scans in the software. Automatic alignment did not work, so he aligned them manually. He considered the resulting data clean and suitable for many practical projects.
Rocket Markerless Scan
The Rocket captured usable data without markers, but the result was muddier than the marker-based scan. With markers, fine ridges came through much better. The reviewer says the scanner still needs markers in view for some tracking, and reflective black areas were difficult to capture.
Detailed Camera
The Rocket captured fine data from a dark, semi-reflective object but did not capture its shiny glass back. The reviewer says scanning spray could help with reflective surfaces. More scanning time and finer resolution produce more detail, but take longer.
Human Scan
The reviewer scanned Joe in under a minute and created a textured, printable model. Some areas, including under the arm, were incomplete.
Software
The software supports point-cloud generation, cleanup, project alignment, watertight or non-watertight meshing, smoothing, mesh optimization and simplification, texture adjustment, measurement, and export.
A watertight mesh filled gaps in the test part. Smoothing could reduce surface texture, but might also remove detail.
Practical Tips and Limitations
- Marker layouts should be random and asymmetrical. A symmetrical grid confused the scanner because it could not distinguish the markers.
- Use a rigid surface for markers. If they shift, tracking can suffer, so the reviewer advises against using a flexible sheet or ordinary paper.
- More markers are not necessarily better; too many or symmetrically arranged markers can disrupt tracking.
- The reviewer says the scanners do not provide the public accuracy figures he would want for professional inspection. They can produce useful data for reverse engineering and general projects, but he would not choose them to inspect machined parts to a guaranteed tolerance.
- Tethered mode was not tested. The reviewer had been told it may improve speed and performance.
Comparisons and Value
The reviewer compares the EinStar 2’s scan speed favorably with his experience of the HX2, while saying the Rocket is not as fast as the FreeScan Combo.
He describes professional scanners such as the FreeScan Combo as substantially more capable and metrology-grade, but far more expensive—around $15,000 in his comparison. He also recalls the HX2 costing about $10,000 a year earlier.
The EinStar 2 is estimated to cost roughly $1,100–$1,200. The Rocket costs about $500 more, but the reviewer says it is still under $2,000.
Verdict
The reviewer strongly recommends the Rocket if the extra cost is affordable, citing its cross lasers and markerless scanning. The EinStar 2 remains his budget pick and, in his view, offers very good results for the price.
Both are recommended for hobby projects, quick scans, and general reverse engineering—not for work that requires verified metrology-grade accuracy.
Speakers
- Reviewer/host: Provides the comparisons, scan demonstrations, workflow advice, and overall recommendation.
- Joe: Appears as the human-scan subject and briefly responds during the demonstration; no separate technical assessment is given.
Rate this summary
Your feedback will help improve summaries.
Improve this summary
Reprocess with a stronger model when the summary feels incomplete or inaccurate.
Translate summary in another language
Ask questions to this video
Chat for follow-up questions, clarifications, and source-backed answers.