Video summary

If I Had to Buy a Gaming Mic Today. This is What I'd Do

Main summary

Key takeaways

Product Review

Summary

The video argues that most gamers do not need an expensive microphone to sound good. The reviewer’s main recommendation is to improve and test the mic you already own, then upgrade only to solve a specific problem.

Buying advice and key features

  • A headset mic may be enough if teammates hear you clearly and you like its sound. Because it moves with your head, it tends to stay a consistent distance from your mouth.
  • If you need a separate mic, a USB mic around $50–$60 can be a good starting point and connects directly to a PC. The reviewer names the FIFINE AM8 (about $60) and FIFINE K600 (about $70) as models he has tested. His first good mic was a Razer Seiren Mini, which he says worked well.
  • Price and appearance do not guarantee sound quality. A $30 gold-colored AliExpress mic sounded worse to him than his headset. A more expensive HyperX mic sounded about the same as, or possibly worse than, the mic he already owned.
  • Before buying, compare raw, unprocessed voice samples from the same reviewer, recorded in the same room at similar playback volume. Pay attention to vocal tone, clarity, and mic placement—the results may differ if you plan to position the mic farther away.
  • For one person at a desk, cardioid pickup is a useful starting point: it favors sound from the front and rejects more from behind, which may help reduce keyboard noise. Omnidirectional pickup captures sound from all around and can suit groups, but offers less rear rejection.
  • Useful controls include an accessible mute button and a gain knob. A higher sample-rate number, such as 192 kHz, is not a reason to spend more for gaming and calls; the reviewer says 48 kHz is sufficient.
  • Check the connection and total cost. USB connects directly to the computer; XLR requires an audio interface. A hybrid mic offers both, but check which controls work with each connection—on many models, mute and gain controls only work over USB.

Interfaces and mixers

An interface is necessary for an XLR-only microphone: it boosts the mic signal and converts it to digital audio for the PC. With a USB mic, those functions are already built in; switching a hybrid mic to XLR does not automatically improve its sound.

When choosing an interface, check the number of mic inputs and whether it provides enough gain for the microphone. The reviewer uses an Elgato Wave XLR with his Shure SM7B, which needs substantial gain.

48V phantom power is needed by most XLR condenser mics, but not by passive dynamic mics such as the SM7B. Check the mic’s requirements.

For ordinary gaming, calls, or one microphone, a mixer is unnecessary. It becomes useful when managing several audio sources, such as multiple mics, music, another PC, or a more complex streaming setup.

Improving sound and user experience

The reviewer recommends trying to improve your current mic before buying more equipment. His own SM7B recording sounds substantially different after processing.

In post-production, he adjusts dynamics, EQ, and volume. He also uses a de-esser for harsh S sounds, a de-hummer for steady electrical hum, and noise reduction when needed. He normalizes his final level to a usual −2 dB target.

He does not apply one fixed preset to every recording: room conditions and his voice vary, so he listens and adjusts each time. Presets from other creators can be starting points, but should be tailored to your mic, voice, and room.

For live calls and games, processing must run in real time. Some mic or interface software provides EQ, dynamics, and noise suppression; the reviewer uses Wave Link 3.0. Other software can provide similar processing.

Set input gain using a loud callout: normal speech should be clear while leaving headroom for shouting. Excessive gain can cause clipping, which cannot be fixed simply by lowering the volume afterward.

To reduce plosive thumps from P and B sounds, start with the included windscreen or pop protection. If needed, move the mic out of the direct airflow or add a pop filter. Keep a headset mic’s foam cover on.

Check what others actually hear: ask a friend to record a short sample from their side of a Discord call. If local audio sounds good but Discord audio does not, check the call app’s settings before blaming the mic.

When spending more may make sense

  • Upgrade once you can identify a specific shortcoming in your current setup.
  • A small wireless mic may be worthwhile if you record away from your desk and want to avoid transporting a desk mic arm and interface.
  • Paying for a mic’s appearance is also a valid choice, but do not expect the look alone to deliver a major sound improvement.

Overall verdict

For gaming and calls, start with a decent, affordable USB mic—or keep using a headset mic if it already works well. Prioritize placement, gain, and appropriate processing over expensive gear. Buy an interface only when you need XLR, and spend more only for a clear practical benefit.

Speaker perspective: The reviewer offers advice based on his own experience, including owning an SM7B, trying cheaper and pricier mics, and using an Elgato Wave XLR and Wave Link 3.0. No other speakers or explicit product ratings are presented.

Rate this summary

Your feedback will help improve summaries.

Improve this summary

Reprocess with a stronger model when the summary feels incomplete or inaccurate.

Pro

Translate summary in another language

Pro

Ask questions to this video

Chat for follow-up questions, clarifications, and source-backed answers.

Coming soon

Share this summary

Original video